How to use them.

Modular floor designer

Design a floor of interlocking tiles, see it in 3D, and get a quote or download it to print.

1. 1

   Design. Choose the pattern, whether the tile is open or solid, its colors and, if you like, a logo or drawing.

2. 2

   Floor. Enter your space's measurements or how many tiles you need, and paint or rotate tiles in the floor view.

3. 3

   Check. Rotate the 3D view and check the recommended use, the weight and the print hours.

4. 4

   Export. Get a quote on WhatsApp with your design ready, or download the Bambu Studio project, a 3MF or an STL.

• The snap joint stays hidden; the puzzle joint shows.
• “Start over” resets everything.

3D color separator

Turn a color 3D model into a file to print in several colors, as one piece per color, or cut into parts.

1. 1

   Model. Upload a GLB, an OBJ (zipped with its textures), a PLY or an STL, and set its largest dimension.

2. 2

   Colors. Choose how many (1 to 8), swap them for your filaments, and fix them with the brush or by filling areas.

3. 3

   Download. Multicolor for the AMS, one press-fit piece per color, or cut into parts with joints.

4. 4

   Print. Open the file in Bambu Studio, OrcaSlicer or PrusaSlicer: each color already goes to its filament.

• “Clean up specks” merges very small color areas, which do not print well.
• The model is processed in your browser: it is never uploaded to any server.

3D Thermoforming

Make shaped mesh pieces: print them flat, heat them and press them over a mold, also printed.

1. 1

   Shape. Upload a photo or an SVG, draw it by hand or pick a ready-made shape. Adjust the width and height.

2. 2

   Piece. Choose the mesh, its thickness and color, and how it opens: band, clips, hinge or screw cap.

3. 3

   Download. Everything in one file for Bambu Studio (the mold in PETG and the piece in PLA), or the STLs.

4. 4

   Form the piece. Heat each sheet over the form, push the ring down to the base and hold it for 30 seconds. Then join both halves.

• Wear gloves: the sheet and the hot air can burn.
• “Parts to print” shows everything that goes in the file.

Christmas ornaments with a name

Design a Christmas ornament with a name, see it in 3D and order it: we print it and ship it to you.

1. 1

   Ornament. Pick the ornament (bauble, star, heart, tree, bell, snowflake, stocking, reindeer, snowman, paw or cat) and its details: snowflakes, stars, baubles, reindeer or pets.

2. 2

   Name. Type the name (up to 12 letters), choose the lettering and, if you like, the year or “My first Christmas” below.

3. 3

   Colors. Choose the ornament color and the letter color. Turn the 3D view to see it from every side.

4. 4

   Pídelo. A single one or a pack of 5 or 10 with one name per line. Add it to the cart or order on WhatsApp.

• Long names get smaller letters: the preview tells you when a shorter one works better.
• Each ornament is about 8 cm and comes with its hanging loop.

Custom keychains

Design a keychain with a name or with your logo in its colors, see it in 3D and order it: we print it and ship it to you.

1. 1

   Design. Pick the shape: tag, cut-out name, heart, star, medal, paw, bone, house, shield, rounded rectangle, hexagon, cloud, speech bubble, diamond, egg or your SVG logo.

2. 2

   Text. Type the name (and a second line if the design has one), choose the lettering, the icon and where the ring goes.

3. 3

   Colors. Choose 2 to 4 colors. With your logo, each SVG color prints in the filament you choose.

4. 4

   Pídelo. Uno o muchos, con precio por tramos acumulativos. Agrégalo al carrito o pídelo por WhatsApp.

• The SVG is split by color: what is on top covers what is below, as in the drawing.
• Merge similar colors to stay within 4 (what fits in the AMS).

Phone cases

Design and customize your phone case, then order it printed in flexible TPU.

1. 1

   Your phone. Choose the brand and model. If it says “estimated measurements”, we recommend ordering a fit test first.

2. 2

   Adjust with a photo. Optional: place the phone face down on white paper and take a photo straight from above. Drag the 4 corners and the camera box. The photo stays in your browser.

3. 3

   Holes and buttons. Check the camera, volume and power buttons, port, speakers and microphone. Move or resize them if your phone is different, or add a hole.

4. 4

   Customize. Choose a color, thickness, cutout pattern, name, image and strap loop.

5. 5

   Order it. Choose a fit test or the full case. Add it to your cart or order via WhatsApp.

• TPU is flexible: the case stretches to fit
• If your model is not listed, send us its exact brand and model
• We do not accept images of copyrighted brands or characters (Disney, teams, etc.) without a license